Bambu Lab PLA Silk+ Filament – 1.75mm, 1kg
Couldn't load pickup availability
Buying in bulk?
Need larger quantities for a project or ongoing production? Request bulk pricing for hardware, filament, and other maker supplies.
Bambu Lab PLA Silk+ gives decorative prints a glossy, silk-like finish. It is a good choice for display models, ornaments, trophies, lettering, and other projects where you want the surface to catch the light.
The Silk+ formulation offers improved layer adhesion compared with conventional silk PLA. PwnCNC is a Bambu Lab authorized reseller, and we use Bambu printers in our own print farm.
Choose your color and packaging
- Refill: One 1kg roll without a spool. Install it on a compatible Bambu reusable spool before use.
- With spool: One 1kg roll supplied on a reusable spool.
Packaging choices vary by color. Every listed variant contains 1kg of 1.75mm PLA Silk+ filament.
Product details
- Material: PLA Silk+
- Finish: Glossy silk
- Diameter: 1.75mm ± 0.03mm
- Net filament weight: 1kg
- Color selection: 13 colors, with Bambu color codes in the selector
- RFID: Supported Bambu AMS hardware reads the filament identification and material settings.
Printing for the best shine
Start with the Bambu PLA Silk+ profile and select your printer and build plate. For the best gloss, Bambu recommends lowering the outer-wall speed to 50mm/s. Surface sheen can change with temperature, speed, and model geometry.
- Nozzle temperature: 210–240°C
- Bed temperature: Bambu lists 35–45°C with glue; follow the profile for your specific plate.
- Drying: 55°C for 8 hours in suitable drying equipment. Follow the temperature limits for your dryer and spool.
- Storage: Sealed with desiccant, below 20% relative humidity.
Hardware compatibility
Bambu lists compatibility with the original AMS and AMS lite when used with a compatible spool. RFID recognition requires supported Bambu hardware. Other FDM/FFF printers must support 1.75mm silk PLA and its printing temperatures; enter material settings manually.
Bambu recommends a 0.4mm hardened-steel nozzle, or a 0.2mm or 0.4mm stainless-steel nozzle. Its product guidance does not recommend 0.6mm or 0.8mm hardened-steel nozzles for this material.
PLA Silk+ is best suited to decorative and general-purpose indoor prints. Choose a material with higher heat resistance for parts exposed to hot vehicles or other high-temperature conditions.
Availability
Local stock and supplier availability vary by color and packaging. Contact PwnCNC to confirm stock or ordering options for time-sensitive projects.
