Below are the specifications for the Dominator Pro. If you have any questions, please contact us.
See Dominator Pro
| Machine Specs | |
|
C7 Rolled Ballscrew X/Y |
16mm diameter, 5mm pitch |
| C7 Rolled Ballscrew Z | 16mm diameter, 5mm pitch |
| Linear Rails | HG-15 |
| Homing Switches | Inductive sensors with Dual Y homing |
| Spindle Mount | 80mm Diameter (dual mount capable) |
| Steppers |
2Nm or 3Nm Closed-Loop Masso steppers |
| Total Z Travel | 203.2mm / 8" |
| Clearance from table to Z axis with 1/2" MDF + 3/4" MDF Slats | 184.15mm / 7.25" |
| Clearance from table to Z axis without | 185.1mm / 7.28" |
| Gantry Overhang for joinery | 50.8mm / 2" |
| Voltage | 36v / 110v or 220v, PS Switch |
| AC Plug | IEC C14 connector to NEMA 5-15P (Standard US Plug) |
| Controller | Masso Touch - Advanced Spindle & ATC Ready |
| Design Software | Free year of CarveCo Maker |
|
Size 4x4 |
|
| Machine Travel |
X: 1296mm / 51" Y: 1277mm / 50.27" |
| Machine Footprint |
Deep 1600mm / 63" |
| MDF Bed (DiY) |
Deep 1219.2mm / 48" |
|
Size 2x4 |
|
| Machine Travel | 670mm / 26.38" |
| Machine Footprint | Deep 965mm / 38" Wide 1600mm / 63" |
| MDF Bed(DiY) |
Deep 609.6mm / 24" |
What's included with Dominator Pro:
- Dominator Pro
- Masso Touch - Advanced for Motion Control
- 1yr CarveCo Maker for Design
- Assembly tools
Optional Upgrades:
What you need to provide:
- Without Legs kit, you'll need a sturdy table for machine to sit upon
- 80mm Spindle Kit or Spindle System
- Windows computer for CAD
- 1/2" MDF for bed surface at minimum, recommend adding t-tracks and 3/4" MDF on top for a convenient hybrid bed.
