ZYLtech Matte PETG Filament – 1.75mm, 1kg

$18.99

Shipping calculated at checkout.

Product variants

Quantity

2 in stock

Pickup available at Headquarters

Usually ready in 2-4 days

Get the strength and durability of PETG with a smooth, low-gloss finish using ZYLtech Matte PETG Filament. This material is designed for functional parts that need better toughness and heat resistance than PLA while remaining easier to print than ABS on most properly configured FDM printers.

The matte surface helps reduce the appearance of layer lines and gives finished parts a clean, professional look. It is a strong choice for brackets, fixtures, mounts, organizers, shop accessories, prototypes, guards, containers, and other everyday functional prints.

Why You’ll Like It

Durable PETG performance: Offers good impact resistance, layer adhesion, and toughness for functional parts.
Smooth matte finish: Produces a refined, low-gloss surface that helps disguise visible layer lines.
Easier than ABS: Prints with lower warping and usually does not require an enclosure.
Reliable extrusion: Formulated for steady feeding and consistent print quality.
Broad compatibility: Works with most FDM printers using 1.75mm filament, including Bowden and direct-drive systems.

Available Colors

Matte White
Matte Gray
Matte Black
Matte Blue
Matte Red
Matte Yellow

Recommended Print Settings

Nozzle temperature: 230–270°C
Bed temperature: 70–90°C
Part cooling: Up to approximately 40% after the first few layers
Maximum volumetric speed: 10mm³/s starting point
Recommended nozzle: 0.4mm or larger
Typical layer height: 0.16–0.28mm

Printing Tips

Start with a standard PETG slicer profile and tune temperature, speed, and cooling for your printer.
Avoid excessive first-layer squish because PETG can bond aggressively to some build surfaces.
Use a release layer when appropriate for glass or other high-adhesion build plates.
Keep the filament dry to reduce stringing, popping, and rough surface finish.