Spindle Cooling System
Spindle Cooling System
Spindle Cooling System
Spindle Cooling System
Spindle Cooling System
Spindle Cooling System
  • Load image into Gallery viewer, Spindle Cooling System
  • Load image into Gallery viewer, Spindle Cooling System
  • Load image into Gallery viewer, Spindle Cooling System
  • Load image into Gallery viewer, Spindle Cooling System
  • Load image into Gallery viewer, Spindle Cooling System
  • Load image into Gallery viewer, Spindle Cooling System

Spindle Cooling System

Regular price
$65.00
Sale price
$65.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

 

Cooling Systems vary and we have a growing list of options for our Spindle System owners:

We have 110v pumps, 220v pumps (reserved for international customers where 110v is not available), and 110v CW300 Chillers. With pond pumps you will need to supply a bucket with a lid and coolant fluid. The chiller is an inclusive package and only needs coolant liquid, plus chillers add heat dissipation via passive cooling (no refrigerant involved).

Our Spindle Cooling System includes 40' of hoses. One option is our standard "Poly Urethane" tubing, another has upgraded Clear and very flexible Superthane Ether tubing (40' clear), while the third has extremely flexible and cloudy Silicone tubing (40' semi-clear).

If additional tubing is required, purchase the difference here and we'll include it in your order as an addition to your included 40' length. Ex: need 25 feed for the feed and return? Purchase 10' and we'll give a 50' segment.

Each hose can be used with our PwnCNC Exclusive Kool Connectors
Hose Side installation instructions can be found here: https://support.pwncnc.com/kb/article/427-kool-connectors/

Additional Information can be found here: https://www.youtube.com/watch?v=SiMHVASlh7k

 

Customer Reviews

Based on 30 reviews
93%
(28)
3%
(1)
0%
(0)
3%
(1)
0%
(0)
E
Eric Wilson

Spindle Cooling System

T
Tom Duszynski
Cooling system

I haven’t figured out how to get the coolant pump to turn on via it plugging block. I can’t find the video explaining the hook up

B
Brian Troup
110v CW 3000 Spindle Cooling System

Works well! I get a consistent 140L per hour, and stays at or under 31c degrees in my hot Florida garage!

B
BB
Still waiting

Ordered on February 21. Received some or the order last week still waiting for the chiller. Could be a border issue.
“Good things come to those who wait”

S
Steve McElhaney
Spindle Cooling System - Chiller

The chiller is working as described with my new PwnCNC water cool spindle. There are no alarm lights or operating lights. Earlier versions show a green and red light but the manufacturer has removed those lights. There is an alarm output that is an open/close contact to indicate normal or alarm condition.. No voltage on the output. I am still investigating if I can use the alarm contacts to notify me of any issues. Hopefully tie that into the Masso controller. It is a good product and should work well in my application.